Plumber in NJ

Are you looking for Plumbers in NJ? Total Plumbing, Heating and Drain Service are fully bonded and insured plumbers in NJ that have been providing plumbing and heating services to both residential and commercial customers for over 30 years.

People often face issues with their plumbing services. It could be because of multiple reasons like the clogging of the sink or drain, or the shower not delivering water at the right pressure or the shortage of cold water in the unit, etc.

So, if such is the case with your shower and you are trying to detect what is wrong with it and why is there a shortage of cold water in it, then you have arrived at the right page. Come let’s begin!

Why is there no cold water?

The first step here is to determine if the shortage of cold water is an issue with only one faucet or is it happening all over the house. Because if all the taps in the house are only delivering hot water then it is possible that a shutoff valve might have been accidentally turned off. If that is the case then turning on the valve should solve the issue.

However, if only one faucet is faulty then the issue is probably with the defective pressure-balancing valve. In order to correct this, either you might need to replace the valve cartridge or to call a professional plumber in NJ.

Why is the pressure-balancing valve malfunctioning?

The pressure balancing valve’s main function is to-

Regulate the water pressure

Regulate the ratio of hot water and cold water that is running from the faucet.

So if your shower head or faucet is not in use on a regular basis then the mineral buildup or corrosion can negatively affect the cartridge. In such a situation one needs to replace the valve in order to right the problem.

How can you replace the failed cartridge?

In the first step shut off the shower’s water supply.

Now if you like, you can cover the shower drain with a cloth so that small components from the shower do not fall into the drain and get lost.

Remove the shower handle and lift it off the stem.

In the next step, remove all the parts inside the faucet structure.

If you discover any residual or buildup inside the parts then clean them with a cleaning solution.

Using the needle-nose pliers, pull out the retainer clip.

Remove the cartridge by using the cartridge puller.

Next, install a new cartridge using the plumber’s grease.

Reinstall all faucet parts.

So these are the steps to correct the issue if your shower head is only delivering hot water. Follow them and all should be well.

For Plumbers in NJ, call Total Plumbing Heating & Drain at 201-804-0001

Total Plumbing Heating & Drain - Your Trusted Plumbers in NJ.